- Deborah Cross (Unlicensed) to resolve if 'contract' column in tables is necessary and should be called that. Cross reference return values and remove those tables.
...
greenID has a web service method that returns the verification details for an individual.
...
getVerificationResult can be called at any time after a person has been registered to return the current verification details for a person.
Verification results are returned in a complex SOAP type called RichVerificationResult this RichVerificationResult this structure contains information about whether a person has completed their online verification, and if so, whether the verification was successful, and any changes to the original data supplied that were made during the verification process.
...
| Code Block |
|---|
VerificationResult getVerificationResult( String customerId,
String userId) |
Parameters
Name | Type | Required? | Description |
|---|---|---|---|
customerId | String 255 Chars | Yes | This parameter is GreenID's identifier for the client application. The value is supplied by GreenID, and must be included with each registration request. |
userId | String 255 Chars | Yes | This parameter is an identifier that the client uses for the individual being verified. GreenID does not use it as an identifier, but in order to easily locate individual's for a particular client application, the userIdis userId is used. This must match a registered userId |
Return Value
RichFieldResult
The complex type RichFieldResult has the structure described below:
...
Member
...
Type
...
Description
...
Contract
...
name
...
String
255 Chars
...
The name of the field. The possible name will depend on the source used. Again which sources used will depend on the individual customer setup, and new sources, with potentially new fields are constantly being added. For a list of possible field names for each source, please refer to the Data Source Reference tables.
...
Not null.
...
status
...
String
255 Chars
...
This member describes the status of the field. For a complete list of possible status values, please refer to the Reference Table of Field Status.
...
Not null.
...
dataDifference
...
String
No Char limit
...
This member will contain changed values. That is, if a value was changed in order to become verified, then this member will contain the value that was the data was changed to, and subsequently verified.
...
...
data
...
String
No Char limit
...
This contains the original data that was supplied at time of registration. In the case of a status of ADDITION (see the Reference Table of Field Status) then this will hold the added data.
...
...
dataInfo
...
String
255 Chars
...
This contains information about the data. At this time it contains either “previousAddress” or “currentAddress” to indicate which address this data was checked as.
...
...
label
...
String
No Char limit
...
This field represents a human readable version of name, it will reflect what the user may see on the screen when they fill the details in. The data in this field is designed for reporting purposes and can change without notice.
...
...
format
...
String
255 Chars
...
Indicates the format of the data in the field. “plain” indicates a plain text field. This may differ depending on the customer’s individual setup.
...
PostOfficeData
The complex type PostOfficeData has the structure described below.
This type and the following members are for the most part exact representations of the fields found in an Australia Post contract. The reader should be aware of the individual Australia Post contract they will be using to ensure that they can match up the fields. These fields are retrieved from a flat file and stored in Strings with no interpretation of the meanings of the fields. Not all implementations of an Australia Post contract will have all the fields detailed below.
...
Member
...
Type
...
Description
...
Contract
...
customerId
...
String
255 Chars
...
This parameter is GreenID's identifier for the client application. The value is supplied by GreenID.
...
Not null.
...
documents
...
String
...
Human readable string that is a comma separated list of all the names of the documents used to verify this user.
...
Not null.
...
header
...
detailRecordHeader
...
Representation of the header of the flat file received from Australia Post
...
Not null.
...
poFileName
...
String
255 Chars
...
The name of the actual file read from Australia Post
...
Not null.
...
records
...
documentRecord[]
...
List of individual representations of the documents used to verify this User
...
Not null.
DetailRecordHeader
The complex type DetailRecordHeader has the structure described below:
...
Member
...
Type
...
Description
...
Contract
...
amount
...
String
255 Chars
...
Unsigned amount in cents.
...
...
channelId
...
String
255 Chars
...
0 = default
...
...
date
...
String
255 Chars
...
ddmmyy (NOTE: system generated date with no slashes)
...
...
dateOfBirth
...
String
255 Chars
...
ddmmyyyy represents the date of birth on the form that was checked.
...
...
filler
...
String
255 Chars
...
Often there will be filler, it serves no purpose and should be ignored.
...
...
formVersion
...
String
255 Chars
...
A-Z
...
...
givenName
...
String
255 Chars
...
16 characters of the given name that was on the form that was checked.
...
...
id
...
Long
...
Extra identifier that identifies this record. Not set by Australia Post.
...
...
idWizardRefNo
...
String
255 Chars
...
...
...
paymentMethod
...
String
255 Chars
...
'00' = Cash/EFTPOS/Direct Debit, '01'-'09' = number of Cheques, '11' = VISA, '12 = MasterCard. Note: This may differ per contract, but in general the above applies.
...
...
phoneNo
...
String
255 Chars
...
Phone number as entered on the form that was checked.
...
...
postOfficeName
...
String
255 Chars
...
Presumably the name of the Post Office the form was checked at.
...
...
recordNo
...
String
255 Chars
...
Seems to be fixed as ‘1’
...
...
recordType
...
String
255 Chars
...
Seems to be fixed as ‘5’
...
...
referenceNo
...
String
255 Chars
...
The reference number used to identify this user. Most often this will be the userId. It must be 16 characters or less.
...
...
surname
...
String
255 Chars
...
20 characters of the surname that was on the form that was checked.
...
...
totalNumberOfIdDocument
...
String
255 Chars
...
Number of documents used to verify this user
...
...
typeCode
...
String
255 Chars
...
...
...
uniqueReferenceNumber
...
String
255 Chars
...
wwwwwwttnnnnn, first 6 digits are AP Work Centre Code.
...
DocumentRecord
The complex type DocumentRecord has the structure described below:
...
Member
...
Type
...
Description
...
Contract
...
amount
...
String
255 Chars
...
Always zero
...
...
comments
...
String
255 Chars
...
...
...
countryOfIssue
...
String
255 Chars
...
Name of country from the document if applicable
...
...
dateOfBirthMatchesaForm
...
String
255 Chars
...
Y = Yes, X = not applicable
...
...
documentExpiryDate
...
String
255 Chars
...
dd/mm/yyyy; spaces if not applicable NOTE: (manually entered date with slashes)
...
...
documentName
...
String
255 Chars
...
This is an automatic lookup to convert the idDocumentType member into a human readable document name.
...
...
documentNumber
...
String
255 Chars
...
Alphanumeric, eg passport number.
...
...
filler
...
String
255 Chars
...
Often there will be filler, it serves no purpose and should be ignored.
...
...
id
...
Long
...
Extra identifier that identifies this record. Not set by Australia Post.
...
...
idDocumentType
...
String
255 Chars
...
Code number representing the document type. The lookup for the name is done automatically and stored in the documentName member.
...
...
idWizardRefNo
...
String
255 Chars
...
...
...
issuedBy
...
String
255 Chars
...
This may be present instead of country of Issue, stateOrTerritoryOfIssue, utilityAccountIssuer and utilityAccountType. It may selectively hold this information in a less rigid format.
...
...
issueDate
...
String
255 Chars
...
dd/mm/yyyy; spaces if not applicable NOTE: (manually entered date with slashes)
May not be present.
...
...
nameMatchesForm
...
String
255 Chars
...
Y = Yes, X = not applicable
...
...
photoMatch
...
String
255 Chars
...
Y = Yes, X = not applicable
...
...
recordNo
...
Strin
255 Chars
...
...
...
recordType
...
String
255 Chars
...
...
...
referenceNo
...
String
255 Chars
...
...
...
residentialAddressMatchesForm
...
String
255 Chars
...
Y = Yes, X = not applicable
...
...
stateOrTerritoryOfIssue
...
String
255 Chars
...
ACT, QLD, NSW, NT, SA, TAS, VIC or WA;
...
...
utilityAccountIssuer
...
String
255 Chars
...
If specifically a utility, then the name.
...
...
utilityAccountType
...
String
255 Chars
...
01 = electricity, 02 = gas, 03 = water, 04 = telephone
...
This method may raise a FaultDetails, inside which can be the following codes:
- InvalidCustomerIdFault
- UserIdNotFoundFault
- InvalidCertificateException
- SystemFault
...